Several rust spots on the back pass. side fender:
A crack in the paint left of the trunk-lid:
Rust along the edge of the trunk-lid.
Not very cool and it only gets worse so lets just get some paint on there before it gets too bad. I know I can never get the same colour so I just used the closest match which is the paint I also used on the front bumper. One day this car will be repainted anyway. It can be a sleeper until then ;-)
I found this cool blue flexible tape and I just taped away...
Then I put newspaper around the spots to be painted:
Just in time I discovered this new sanding-disc from 3M. Awesome! This would have cost me an hour of sanding with normal sandpaper. Now it only took 10 minutes:
Then I put on more anti-rust primer. This one will actually stop existing rust as well. But I sanded away every bit I could find.
BAD SURPRISE! When I removed the blue tape, it tore away loads of paint. I was not happy!
I decided to remove all the blue tape before continuing and tape with normal painter's tape instead.
Then I started spraying the first white coats:
These spots too a bit longer because I kept sanding off too much... But eventually I put on white here as well ;-)
Nice!
The colour difference is quite significant unfortunately. I guess the car will have a few white spots the coming years...
I taped off the bottom black decal stripe and put a few layers across the full width of the trunk so you don't notice the colour difference on the trunk at all:
It's a good solid layer of paint everywhere. Now the edges need to be sanded away still. And maybe a few layers of clear varnish.
But I think I'm going to start with removing the LPG first soon...
